1/9 1. scope of application these specifications are applied to the chip type led lamp , model CL-L103-MC6L2-C 2. part code c l - l 1 0 3 - m c 6 l 2 - c series l103 : white power led for general lighting. special specifications m : general color rendering index typ. 85 type. watt class c6 : 6 watt package. lighting color l2 : energy star correlated color temperature 2700(k) approved checked drawn symbol citiled - 2010/3/1 mark date CL-L103-MC6L2-C description appro. issue of first edition name drawing no specifications citizen electronics co.,ltd. ref.ce-p590 03/10
2/9 3. outline drawing 4. performance ( 1 ) absolute maximum rating symbol unit power dissipation p d w forward current i f ma forward pulse current i fp ma *1 reverse current i r ma operating temperature t op c storage temperature t st c junction temperature tj max c *2 *1forward current : duty<=1/10 , pulse width<=10msec *2 d.c. current : tj = tc + rj-c p d pulse current : tj = tc + rj-c pw(power dissipation / one-pulse) duty approved checked drawn symbol citiled - 2010/3/1 mark date CL-L103-MC6L2-C description appro. citizen electronics co.,ltd. issue of first edition drawing no 1,200 -30 ~ +85 120 -40 ~ +100 1 parameter rating value 8.9 840 specifications name anode cathode cathodemark(gray) resin anode cathode protection device unit mm tolerances unless otherwise specified 0.3 it has a protection device built in as a protection circuit against static electricity. tc measuring-point(board side) 12 12 12 ref.ce-p590 03/10
3/9 ( 2 ) electro-optical characteristics ( tc=25 c ) symbol condition min. typ. max. unit v f i f =700ma 8.75 9.30 10.5 v v i f =700ma 356 445 - lm ra i f =700ma - 85 - - rj-c junction-case - 5.0 - c/w chromaticity coordinates ( condition : i f =700ma ,tc=25 c ) x y center 0.4578 0.4101 a 0.4813 0.4319 b 0.4562 0.4260 c 0.4373 0.3893 d 0.4593 0.3944 *color region stay with in macadam "3-step" ellipse from center. note: the tolerance of measurement at our tester is v f 3% , v10% , chromaticity(x,y)0.01. approved checked drawn symbol citiled - 2010/3/1 mark date l2 general color rendering index drawing no description appro. citizen electronics co.,ltd. CL-L103-MC6L2-C issue of first edition specifications thermal resistance color rank parameter forward voltage luminous flux name 0.38 0.39 0.40 0.41 0.42 0.43 0.44 0.43 0.44 0.45 0.46 0.47 0.48 0.49 x y ref.ce-p590 03/10
4/9 5. characteristics forward current vs. forward voltage forward current vs. relative luminous flux forward current vs. chromaticity coordinate case temperature vs. chromaticity coordinate approved checked drawn symbol citiled - 2010/3/1 mark date specifications name CL-L103-MC6L2-C issue of first edition drawing no description appro. citizen electronics co.,ltd. -0.020 -0.015 -0.010 -0.005 0.000 0.005 0.010 0.015 0.020 0 200 400 600 800 i f [ma] x , y x y 0% 20% 40% 60% 80% 100% 120% 140% 0 200 400 600 800 i f [ma] r e l a t i v e l u m i n o u s f l u x [ a . u . ] 7.5 8.0 8.5 9.0 9.5 10.0 10.5 0 200 400 600 800 i f [ma] v f [ v ] -0.020 -0.015 -0.010 -0.005 0.000 0.005 0.010 0.015 0.020 0 20 40 60 80 100 tc [c] x , y x y i f =700matc=25c tc=25c ref.ce-p590 03/10
5/9 case temperature vs. forward voltage case temperature vs. relative luminous flux case temperature vs. allowable forward current spectrum approved checked drawn symbol citiled - 2010/3/1 mark date specifications description appro. citizen electronics co.,ltd. CL-L103-MC6L2-C drawing no issue of first edition name 7.5 8.0 8.5 9.0 9.5 10.0 10.5 0 20 40 60 80 100 tc [c] v f [ v ] 0% 20% 40% 60% 80% 100% 120% 0 20 40 60 80 100 tc [c] r e l a t i v e l u m i n o u s f l u x [ a . u . ] 0.0 0.2 0.4 0.6 0.8 1.0 1.2 350 450 550 650 750 [nm] r e l a t i v e e m i s s i o n i n t e n s i t y [ a . u . ] 0 200 400 600 800 1000 0 25 50 75 100 125 tc [c] i f [ m a ] i f =700ma i f =700ma i f =700ma ref.ce-p590 03/10
6/9 6. reliability (1) details of the tests (2) judgment criteria of failure for reliability test (ta=25 c) symbol v f v u defines the upper limit of the specified characteristics. s defines the initial value. approved checked drawn symbol citiled - 2010/3/1 mark date test item test condition specifications 100 c 1000 hours note: measurement shall be taken between 2 hours and 24 hours, and the test pieces should be continuous operation test moisture-proof test 60 c, 90 %rh for 1000 hours ta=85 c ,i f =700 ma 1000 hours(with al-fin) low temperature storage test -40 c 1000 hours ta=-30 c, i f =700 ma 1000 hours(with al-fin) ta=60 c,i f =700 ma 1000 hours(with al-fin) high temperature storage test thermal shock test i f =700ma i f =700ma -40 c 30 minutes C 100 c 30 minutes, 100 cycle > u 1.1 < s 0.85 measuring condition judgment criteria for failure measuring item forward voltage citizen electronics co.,ltd. description appro. issue of first edition drawing no name CL-L103-MC6L2-C total luminous flux returned to the normal ambient conditions after the completion of each test. ref.ce-p590 03/10
7/9 7. packing specifications (1) packing an empty tray is placed on top of a five-tier tray which contain 50 pieces each. the set of six trays is banded together with two rubber bands. (smallest packing unit: 250 pieces) a label with product name, quantity, lot number is placed on the upper empty tray. tray (dimensions: 310 200 11mm / materials: electrically conductive ps) approved checked drawn symbol citiled - 2010/3/1 mark date name CL-L103-MC6L2-C drawing no description appro. citizen electronics co.,ltd. specifications issue of first edition < packing figure > product 50pcs/tray 1. type e.g. CL-L103-MC6L2-C 2. p.no. (cutomer's p/n) e.g. xxx 3. lot no. e.g. 03d001 - first letter: last digit of the year e.g. 0 : year 2010 - second letter: production month e.g. 3 : mar note: october, november and december are designated by x, y and z, respectively. - third letter: ce's control number e.g. d001 4. quantity e.g. 250 pieces < example of indication label > c us tom er pass c itizen elec tr onic s type p.no lot no q'ty CL-L103-MC6L2-C xxx 03d001 250 pcs. ---(1) ---(2) ---(3) ---(4) ref.ce-p590 03/10
8/9 precautions 1. avoid the application of any stress to the lens portion. 2. avoid any contact by a sharp metal nail or other materials with the lens portion. 3. this product should be secured firmly by fastening an m3 screw on both sides of the product. please be careful not to apply any stress to the product during the clamping operation. please check thoroughly. can dissipate heat as a whole. however, the use of insulating paste is strongly recommended in order to avoid short circuit. this product could be bent during the clamping operation if heat grease in sheet form is used. for this reason, it is recommended that grease in paste form is used. 5. handling of static electricity - these products are sensitive to static electricity charge. please take measures to prevent any static electricity being produced such as the wearing of a wristband or anti-static gloves when handling this product. - all devices, equipment and machinery must be properly grounded. it is recommended that precautions be taken against surge voltage to the equipment that mounts the leds. - esd sensitivity of this product is 1000v (hbm, based on jeita ed-4701/304). - when inspecting the final products in which leds were assembled, it is recommended to check whether the assembled leds are damaged by static electricity or not. it is easy to find static-damaged leds by a light-on test. approved checked drawn symbol citiled - 2010/3/1 mark date name in electrical appliance and material safety law.) condition issue of first edition drawing no CL-L103-MC6L2-C description appro. citizen electronics co.,ltd. specifications as the connection status could vary depending on materials of outer heat sink, 4. thermal conductive silicone grease should be applied to the whole rear surface so that this product in addition, sufficient insulation should be established between heat sink area of led package and surface of fixture. (*surface of fixture: exterior of instrument used for dielectric strength test judgmental criterion i f =max.1ma no-lighting in entire block making up parallel circuit is unacceptable l103 consists of three blocks. resin portion recommended installation screw pitch thermal conductive silicon grease (insulation paste) outer heat sink spring washer ( Q 6mm) m3screw (insulation) plane washer ( Q 6mm) recommended torque : 0.6~0.8n-m ref.ce-p590 03/10
9/9 precautions (continued) in assembled status. 8. heat generation a heat release design is required to use this product efficiently. please ensure that heat generation is not in excess of the absolute maximum rating. (refer to 4-1 performance) 9. recommended soldering of 40w or lower. the temperature of a soldering iron should be adjusted 350c or lower. - no external force is applied to sealing resin during soldering operation. - please do not handle a product until it returns to a normal temperature. note: this product is not adaptable to reflow process. 10. other - this product complies with rohs directives. office automation equipment, communication devices, audio-video equipment, home electrical appliances, measurement hardware and others). in cases where this product is used for the applications that requires high reliability or could directly affect human life or health due to failure or malfunction (aerospace hardware, medical equipment, atomic control equipment and others), please consult with our sales representatives beforehand. - an agreement of formal product specifications is required prior to mass production. - the specifications and appearance of this product are subject to change without advanced notice. approved checked drawn symbol citiled - 2010/3/1 mark date ambient temperature conditions or power dissipation. thus, drive conditions should be - please design a circuit that prevents any reverse voltage (excess current) from being applied to this product instantaneously when the circuit is on or off. between each package is recommended. - soldering operation should be performed within 3.5 seconds per land using a soldering iron - this product is intended for the application in general electronic devices (such as - as this product is designed with consideration of the heat release property of module, - factors responsible for an increase in temperature include heat generation attributed to 7.drive circuit and when two or more led packages are connected, the series connection - a constant current circuit is recommended as a drive circuit. description appro. citizen electronics co.,ltd. name CL-L103-MC6L2-C drawing no issue of first edition specifications fabrication such as changes in shape. - our warranty does not cover situations where this product undergoes secondary 6. please be aware that this product should not come into contact with any other parts taken into consideration, depending on ambient temperature (ta). ref.ce-p590 03/10
|
